Coastal Dental Phone 904-296-7757
Before and After Surgical Dentures
Implant Retained Overdentures
Finance Plan
Request An Appointment

Coastal Dental Service Jacksonville Florida

The "SYNCONE" Denture Stabilization System

The "SYNCONE" Denture Stabilization System:

The "Syncone" system is a process designed by Friadent, a German Implant Manufacturer to stabilize any removable dental prosthesis utilizing Dental Implants.

This process utilizes a special "cone-like" post (referred to as an "abutment" that attaches to a Dental Implant -- this post extends about 5mm above the gum.   The denture (or partial denture) is then fitted with a receptical attachment that slips over the abutment (post) and retains/stabilizes an otherwise loose or floating denture; or a partial denture that formerly had to utilize awkward and food trapping clasps.

This system will work utilizing as few as 2 Implants and up to 6 Implants and is designed to stabilize a removable prosthesis (Denture or Partial Denture).

The advantages of this system are:

1)  Effective:  Superior retention and stabilization of any removable dental prosthesis without having to utilize adhesives, pads, or clasping in the case of a removable partial denture.

2)  Esthetics: The teeth on the denture can be postitioned (within reasonable constraints of the natural anatomy and patient morphology) in a position that is often much more optimal than utilizing the natural teeth that have frequently drifted out of position.  Click here to view a video on how esthetics and function are enhanced by this system.

3)  Cost:  This system is about 20-25% less costly than previous retentive systems used to stabilize a denture.  This is due to refinements of technology and simplifying the process necessary to fabricate other denture retaining/stabilizing systems.

This system is relative new having received it's FDA and ADA approval in late 2004.  Accordingly there are only a few dentists in the United States providing their patients with this service. 

Dr. Davis has participated in a special "hands-on" Implant/Grafting course given by one of the earliest providers of this system:  Dr. John Julian, McPhearson, Kansas.  Dr. Davis is currently continuing taking courses for Implant Dentistry & Dental Laser Surgery and is Certified by the Amican Laser Dentistry Academy. 

Below is an article from the Wichita Eagle on Dr. Julian and the Syncone Denture Stabilization System:

Article reprinted from the Wichita Eagle:

Posted on Tue, Mar. 08, 2005

A lasting smile.

A new dental implant system is allowing patients to leave the office without fear of slipping dentures


The Wichita Eagle

McPHERSON -- Wanda Phillips had potato soup for dinner that night. But she could have had steak and corn on the cob, with a sticky, chewy caramel for dessert.

And her denture would have stayed in place.

Because a few hours earlier, she'd gotten dental implants to hold the denture firmly.

You read that right -- a few hours after having dental implants, she was capable of eating steak and corn with dentures. Without pain.

That's because of a new technique being used by McPherson dentist Jon Julian and only a few other dentists in the United States.

Traditional dentures have a molded piece that fits over the wearer's gums.
And "most people get along pretty darned fine" with traditional dentures,
said Wichita dentist Bob Beaver.

They're what Phillips, 50, had used for years, but in her case, "they weren't too good," she said. "I've had to avoid a lot of foods."

When there is a problem, many denture wearers will tell you, it's the bottom denture that causes the problem.

Sometimes gums recede and the jawbone changes shape. Dentures may slip and slide, causing pain and making eating difficult.

Sometimes, Beaver said, the anatomy of a person's mouth just doesn't permit
a terrific fit.

Some people opt for dental implants -- small titanium rods that are similar
in shape to the root of a tooth and are placed in the jawbone. In general,
implants can serve as a base for a replacement tooth or for bridgework or

For dentures, the "gold standard" has been a device called the Hader bar,
Julian said. It's a bar that joins four dental implants. The denture has
clips that snap to the bar.

To use it, the implants are surgically placed, the gum heals, then the
denture is made to fit.

The drawback in addition to time is cost. Some people try to get around that
by using only two implants with the bar. In that case, the denture sits on
gum tissue in the back, which can cause pressure problems.

Enter the Syncone Denture. It also uses four implants. But rather than being
joined by a bar, each is topped with a small male attachment; the female end
is embedded in the denture.

When they slide together, they hold so well that Phillips' biggest problem a
day after the procedure was getting the denture out again. "Isn't that
something?" she said.

The Syncone system isn't a "mini implant," a device some dentists are using.
Bone will grow around Syncone implants, just as it does with other kinds of
dental implants, and it will become a permanent part of the mouth. "These
implants are meant to last for life," Julian said.

After numbing the patient's mouth, Julian uses a laser to make a depression
in the jawbone for the implants. The laser cuts bleeding to next to nothing.
Sutures aren't needed around the implants.

Once the implants are placed, Julian tops them with the male and female
attachments. He lines the part of the denture that sits on the gums with a
quick-cure acrylic and positions the denture on top of the implants. Seven
minutes later, the female attachments are a permanent part of the denture.

"Being able to do this in a single appointment -- can you imagine?" Julian

Careful positioning and physics allow the denture to be used right after the
implants are placed. The denture touches the gum tissue, but it sits on the
implants, which is why Phillips could eat without pain right away.

The worst part of the whole procedure, she said, was the pins-and-needles
tingling she felt in her mouth as the anesthetic wore off.

The new implant procedure is less expensive than the gold standard. The
Hader bar costs about $9,500, Julian said, compared with $7,500 to $8,000
for the Syncone system.

"Plan on paying for 100 percent of this out of your pocket," he said, noting
that dental insurance typically doesn't cover implants of any kind.

Phillips had the procedure Feb. 28 and a checkup two days later. Now, she'll
have periodic checkups and implant cleanings -- much like regular dental

Julian, who has used the Syncone system in six or eight patients, also is
teaching others about it, as well as about other implants and laser use.
That's why he was among the first couple of dentists in the United States
who were able to use the system after it was approved by the Food and Drug
Administration late last year.

The Syncone Denture system is for a full denture, not for an individual
dental implant or for implants to support a bridge. Only a few dentists in
the United States are using the Syncone Denture system. For more
information, reach Jon Julian at (620) 241-5000.

For more information, you can reach Karen Shideler at 268-6674 or e-mail:

Fill out my online form.
HTML Forms powered by Wufoo